Multiparking System providing dependent parking spaces for 2
cars one on top of the other each. The lower vehicle parks directly on the floor
plate. The vehicle parked on the bottom must be driven out before lowering the
platform.
The height of the platform can be adjusted flexibly (even
subsequently).
Adjustment of maximum load of 2,500 kg can be made
subsequently. Dimensions are in accordance with the underlying dimensions of
parking pit, height and width.
The parking bays are accessed horinzotally (installation
deviation ± 1%).
Vehicles are positioned on the upper parking space using
wheel stops on the right side (adjust according to operating instructions).
Operation via operating device with hold-to-run-device using
master keys.
The operating elements are usually mounted either in front
of the column or on the outside of the door frame
Operating instructions are attached to each operator's
stand.
For garages with doors at the front of the parking system
the special dimensional requirements have to be taken into account.
Multiparking system consisting of :
- 2 steel pillars
with bases that are mounted on the floor (short or long steel pillar bases can
be selected
optionally).
- 2 sliding
platforms (mounted to the steel pillars with sliding bearings)
- 1 platform
- 1 mechanic
synchronization control system (to ensure synchronous operation of the
hydraulic cylinders while
lowering and
lifting the platform)
- 1 hydraulic
cylinder
- 1 automatic
hydraulic safety valve (prevents accidental lowering of the platform while
accessing the
platform)
- Dowels, screws,
connecting elements, bolts, etc.
- The platforms
and parking spaces are end-to-end accessible for parking!
Platforms consisting of :
- Platform base
sections
- Adjustable wheel
stops
- Canted access
plates
- Side members
- Cross members
- Screws, nuts,
washers, distance tubes, etc.
Hydraulic system consisting of :
- Hydraulic
cylinder
- Solenoid valve
- Safety valve
- Hydraulic
conduits
- Screwed joints
- High-pressure
hoses
- Installation
material
Electric system consisting of:
- Operating device
(Emergency Stop, lock, 1 master key per parking space)
- Terminal box at
wall valve
- Electrical
locking device
- Chain control
Hydraulic unit consisting of:
- Hydraulic power
unit (low-noise, installed onto a console with a rubber-bonded-to-metal
mounting)
- Hydraulic oil
reservoir
- Oil filling
- Internal geared
wheel pump
- Pump holder
- Clutch
- 3-phase-AC-motor
(3.0 kW, 230/400 V, 50 Hz)
- Contactor (with
thermal overcurrent relay and control fuse)
- Test manometer
- Pressure relief
valve -
Electrical Installation
Illustrated Maximum Approach
 |
| Add caption |
It is truly a great and helpful piece of information. Wohr Parking is best parking system manufacturers India. Multi level Car parking is for floor plan areas featuring high structures, with an emphasis on stacking the parking places on top of one another up to 50 levels high.
ReplyDelete